ZyXEL Communications GS2210 Series User Manual page 132

Chapter 15 Broadcast Storm Control
Figure 95 Advanced Application > Broadcast Storm Control
The following table describes the labels in this screen.
Table 49 Advanced Application > Broadcast Storm Control
LABEL
Active
Port
*
Broadcast (pkt/
s)
Multicast (pkt/s)
DLF (pkt/s)
Apply
Cancel
132
DESCRIPTION
Select this check box to enable traffic storm control on the Switch. Clear this check box to
disable this feature.
This field displays the port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Select this option and specify how many broadcast packets the port receives per second.
Select this option and specify how many multicast packets the port receives per second.
Select this option and specify how many destination lookup failure (DLF) packets the port
receives per second.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields.
GS2210 Series User's Guide