ZyXEL Communications GS2210 Series User Manual page 76

Chapter 8 Basic Setting
Figure 52 Basic Setting > IPv6 > IPv6 Interface Status
The following table describes the labels in this screen.
Table 18 Basic Setting > IPv6 > IPv6 Interface Status
LABEL
IPv6 Active
MTU Size
ICMPv6 Rate
Limit Bucket
Size
ICMPv6 Rate
Limit Error
Interval
Stateless
Address
Autoconfig
Link Local
Address
76
DESCRIPTION
This field displays whether the IPv6 interface is activated or not.
This field displays the Maximum Transmission Unit (MTU) size for IPv6 packets on this
interface.
This field displays the maximum number of ICMPv6 error messages which are allowed to
transmit in a given time interval. If the bucket is full, subsequent error messages are
suppressed.
This field displays the time period (in milliseconds) during which ICMPv6 error messages of
up to the bucket size can be transmitted. 0 means no limit.
This field displays whether the Switch's interface can automatically generate a link-local
address via stateless autoconfiguration.
This field displays the Switch's link-local IP address and prefix generated by the interface. It
also shows whether the IP address is preferred, which means it is a valid address and can be
used as a sender or receiver address.
GS2210 Series User's Guide