Protocol Based Vlans; Configuring Protocol Based Vlan - ZyXEL Communications GS2210 Series User Manual

Chapter 9 VLAN
Table 32 Advanced Application > VLAN > VLAN Port Setting > Subnet Based VLAN Setup
LABEL
Active
Name
IP
Mask-Bits
VID
Priority
Delete
Cancel

9.6 Protocol Based VLANs

Protocol based VLANs allow you to group traffic into logical VLANs based on the protocol you
specify. When an upstream frame is received on a port (configured for a protocol based VLAN), the
Switch checks if a tag is added already and its protocol. The untagged packets of the same protocol
are then placed in the same protocol based VLAN. One advantage of using protocol based VLANs is
that priority can be assigned to traffic of the same protocol.
Note: Protocol based VLAN applies to un-tagged packets and is applicable only when you
use IEEE 802.1Q tagged VLAN.
For example, port 1, 2, 3 and 4 belong to static VLAN 100, and port 4, 5, 6, 7 belong to static VLAN
120. You configure a protocol based VLAN A with priority 3 for ARP traffic received on port 1, 2 and
3. You also have a protocol based VLAN B with priority 2 for Apple Talk traffic received on port 6 and
7. All upstream ARP traffic from port 1, 2 and 3 will be grouped together, and all upstream Apple
Talk traffic from port 6 and 7 will be in another group and have higher priority than ARP traffic,
when they go through the uplink port to a backbone switch C.
Figure 69 Protocol Based VLAN Application Example

9.6.1 Configuring Protocol Based VLAN

Click Protocol Based VLAN in the VLAN Port Setting screen to display the configuration screen
as shown.
96
DESCRIPTION
This field shows whether the subnet based VLAN is active or not.
This field shows the name the subnet based VLAN.
This field shows the IP address of the subnet for this subnet based VLAN.
This field shows the subnet mask in bit number format for this subnet based VLAN.
This field shows the VLAN ID of the frames which belong to this subnet based VLAN.
This field shows the priority which is assigned to frames belonging to this subnet based VLAN.
Click this to delete the subnet based VLANs which you marked for deletion.
Click Cancel to begin configuring this screen afresh.
GS2210 Series User's Guide