Loop Guard Setup - ZyXEL Communications GS2210 Series User Manual

Intelligent layer 2 gbe switch

Hide thumbs Also See for GS2210 Series:

Table of Contents

Chapter 26 Loop Guard

Figure 151 Loop Guard - Network Loop

Note: After resolving the loop problem on your network you can re-activate the disabled

port via the web configurator (see

the CLI Reference Guide).

26.2 Loop Guard Setup

Click Advanced Application > Loop Guard in the navigation panel to display the screen as

Note: The loop guard feature can not be enabled on the ports that have Spanning Tree

Protocol (RSTP, MRSTP or MSTP) enabled.

Figure 152 Advanced Application > Loop Guard

Section 8.7 on page

68) or via commands (See

GS2210 Series User's Guide

Gs2210-24 Gs2210-24hp Gs2210-48 Gs2210-48hp