ZyXEL Communications GS2210 Series User Manual page 230

Chapter 29 Error Disable
Figure 162 Advanced Application > Errdisable > Errdisable Status
The following table describes the labels in this screen.
Table 103 Advanced Application > Errdisable > Errdisable Status
LABEL
Inactive-reason
mode reset
Port List
Cause
Reset
Errdisable
Status
Port
Cause
Active
Mode
Rate
230
DESCRIPTION
Enter the number of the port(s) (separated by a comma) on which you want to reset
inactive-reason status.
Select the cause of inactive-reason mode you want to reset here.
Press to reset the specified port(s) to handle ARP, BPDU or IGMP packets instead of ignoring
them, if the port(s) is in inactive-reason mode.
This is the number of the port on which you want to configure Errdisable Status.
This refers to the cause of Errdisable Detect or Errdisable Recovery on the Switch.
This field displays whether ARP, BPDU, IGMP and LOOP GUARD on the port is being detected
or not.
This field shows the mode of the cause.
• inactive-port - The Switch disables the port on which the control packets are received.
• inactive-reason - The Switch drops all the specified control packets (such as BPDU) on
the port.
• rate-limitation - The Switch drops the additional control packets the port(s) has to
handle in every one second.
This field displays how many control packets this port can receive or transmit per second. It
can be adjusted in CPU Protection. 0 means no rate limit.
GS2210 Series User's Guide