Copy operations
Separating copies by pages ("Group" setting)
0 As the default setting, "Group" is selected.
0 If "Offset" is selected while a finisher is installed, printed copies are fed
out and stacked on top of each other with each set shifted to separate it.
1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Touch [Group].
–
To separate each set of pages, touch [Offset]. To cancel the
"Offset" setting, touch [Offset] again to deselect it.
3
Touch [OK].
The Basic screen appears again.
Finisher FS-505
2
2-7