Registering From Data Administrator - Konica Minolta bizhub C650 User Manual

Using Authentication Unit (Biometric Type) AU-101
3.2.2

Registering from Data Administrator

In order to use Data Administrator, settings must be specified on the
multifunctional product and the setup procedure must be performed. The
setup procedure includes installing this device's BioDriver(USB-Driver), then
installing Data Administrator Bio Plugin.
Reminder
Data Administrator ver. 3.0 or later must first be installed on the
computer. For details on the operating environment and installation
procedure for Data Administrator, refer to the User's Guide for the Data
Administrator.
Setup
1
Turn off the multifunctional product with the main power switch, and
then disconnect this device from the multifunctional product.
2
Install BioDriver(USB-Driver).
Plug the cable from this device into the USB port on the computer.
The Found New Hardware Wizard starts.
3
Select "Yes, now and every time I connect a device", and then click
[Next].
4
Insert the application CD-ROM included with this device into the CD-
ROM drive of the computer.
AU-101
3
11