Using Pagescope Light; Accessing Pagescope Light - Konica Minolta Pi3505e User Manual

Network Settings
3.8

Using PageScope Light

PageScope Light is a device manager utility provided by the HTTP server
built into the printer/scanner controller. It lets you use a Web browser for
remote control of the printer/scanner controller on a network.
You can register an index or one-touch key, configure network settings,
and perform other tasks from PageScope Light.

Accessing PageScope Light

You can use a Web browser to access PageScope Light.
Note
The machine needs to have an IP address assigned to it before you
can use PageScope Light. See page 3-2 for more information.
1
Start up your Web browser.
2
Use the following format to input the IP address of the machine into the
browser's address bar, and then click Enter.
http://<controller IP address>/
Example: When the IP address of your machine is 192.168.0.10
http://192.168.0.10/
3
The PageScope Light initial screen appears.
Note
If your Web browser is set to use a proxy server, it may not be able
to access PageScope Light. In this case, specify the IP address of
the printer/scanner controller as an exception for access through
the proxy server.
(Example) With Internet Explorer 6
1
Click [Tools] in the menu bar, and then click [Internet Options...].
2
Click the
3
Click the [LAN Settings] button.
4
Click the [Advanced] button in the "Proxy server" group box.
5
Type the IP address of the printer/scanner controller into the
"Exceptions" list box.
Printer Controller Pi3505e Pi3505e/PS
Connections tab.
3
3-23