Service Program Mode Tables; Sp1-Xxx: Feed - Ricoh Russian-C2a Service Manual

SERVICE PROGRAM MODE

4.2.2 SERVICE PROGRAM MODE TABLES

Service Table Key
Notation
[range / default /
step]
italics
*
1111
DFU
Japan only
(S)
(L)

SP1-XXX: Feed

1
Mode Number/Name
001* Leading Edge Registration
1 Paper Tray Feed
2 By-pass Feed
3 Duplex,
002* Side-to-Side Registration
1 1st Paper Feed
2 2nd Paper Feed
3rd Paper Feed:
3
optional PFU tray 1 or
optional LCT
4 4th Paper Feed:
optional PFU tray 2
5 By-pass Feed
6 Duplex,
003* Paper Feed Timing
1 1st Paper Feed
2 2nd, 3rd, 4th Paper
Feed, LCT, and By-pass
Feed
3 Duplex,
Example: [-9 ~ +9 / +3.0 / 0.1 mm step]. The setting can be
adjusted in the range ±9, the setting is reset to +3.0 after an
NVRAM reset, and the value can be changed in 0.1 mm steps
with each key press.
Comments added for reference.
Value stored in NVRAM. After a RAM reset, this default value
(factory setting) is restored.
An SP number set in bold-italic denotes a "Special Service
Program" mode setting that appears only after entering the SP
mode by pressing ' and Copy SP together. (☛ 4.2.1)
Denotes "Design or Factory Use". Do not change this value.
The feature or item is for Japan only. Do not change this value.
Sideways feed direction
Lengthwise feed direction
Adjusts the printing leading edge registration from
each paper feed station using the Trimming Area
Pattern (SP4-417, No.15).
Side2
Use the ! key to toggle between + and – before
entering the value.
The specification is 3 ± 2 mm.
See "Replacement and Adjustment - Copy Adjustment"
for details.
[+9.0 ~ –9.0 / +0.0 / 0.1 mm/step]
Adjusts the printing side-to-side registration from each
paper feed station using the Trimming Area Pattern
(SP4-417, No.15).
Use the ! key to toggle between + and – before
entering the value. The specification is 2 ± 1.5 mm.
See "Replacement and Adjustment - Copy Adjustment"
for details.
[+9.0 ~ –9.0 / +0.0 / 0.1 mm/step]
Side2
Adjusts the paper feed clutch timing at registration.
The paper feed clutch timing determines the amount of
paper buckle at registration. (A larger setting leads to
more buckling.)
[0 ~ 10 / 5 / 1 mm/step]
[0 ~ 20 / 6 / 1 mm/step]
Side2
What it means
Function/[Setting]
4-6
10 August, 2001