Top Access Cover Sensor Removal - Lexmark X746de Service Manual

Top access cover sensor removal

This cable is gray.
Remove the rear frame cover. See
1.
Disconnect the cable in connector JFDS1, and remove the cable through the top left frame.
2.
3. Remove the right cover. See
Squeeze the latches (B) to disconnect the sensor from the top access cover.
4.
5. Remove the sensor and cable through the opening (C).
"Rear frame cover removal" on page 4-37
"Right cover removal" on page 4-38.
Repair information
7526
Previous
Next
Go Back
4-169