Expansion Memory - Ricoh B156 Service Manual

Rev. 06/2005
⇒
⇒
12. Attach the FCC decal [A].
⇒
NOTE: The FCC decal is for U.S.
and Canada only.
13. Attach the FCC decal [B] if you
have installed the dual G3 ports.
14. Turn the main switch OFF and
ON.

1.2.2 EXPANSION MEMORY

1. Remove the rear cover (
2. Remove the controller box cover
( 1.2.1).
3. Install an expansion memory [A].
4. Check if the MBU battery jumper
switch is at "ON".
NOTE: The MBU battery jumper
switch has been already
at "ON" if the fax unit has
been correctly installed.
6. Install the controller box cover
and the rear cover.
7. Print out the system parameter
list, and check that the correct
memory size is shown (Fax SP6-
101).
SM
CÓPIA NÃO CONTROLADA
x 2).
15
CÓPIA NÃO CONTROLADA
FAX UNIT OPTIONS
[B]
[A]
[A]
B750I109.WMF
B750