Ricoh B156 Service Manual page 260

SERVICE PROGRAM MODE
Mode No.
5
(Class 1, 2, and 3)
401* Access Control
When installing the SDK application, SAS (VAS) adjusts the following settings. DFU
200 SDK1 Unique ID
201 SDK1 Certification
Method
210 SDK2 Unique ID
211 SDK2 Certification
Method
220 SDK3 Unique ID
221 SDK3 Certification
Method
404 User Code Count Clear
User Code Count
Clear
501 PM Alarm
1 PM Alarm Level
2 Original Count Alarm
504 Jam Alarm Used with RSS.
Jam Alarm
505 Error Alarm Used with RSS.
Error Alarm
B156/B220
CÓPIA NÃO CONTROLADA
This ID is overwritten by SAS (VAS) when you install or
uninstall the SDK application.
[ 0 ~ 255 / 0 / 1 /step]
[ 0 ~ 255 / 0 / 1 /step]
[ 0 ~ 255 / 0 / 1 /step]
Clears the user code counter.
Specifies the PM alarm level.
[0 ~ 9999 / 0 / 1 /step]
• 0: Disables the PM alarm
• 1 ~ 9999: Specifies the PM alarm level.
The PM alarm occurs when L x 1000 >= C, where L is
the specified level and C is the current PM counter
value.
Turns the original count alarm on or off.
[0 ~ 1 / 1 / 1 /step] Used for RSS.
•
0: OFF
•
1: ON
Selects the jam alarm level.
[0 ∼ 3 / 3 / 1 /step]
• 0: Z (none)
• 1: L (6K x 1/4)
• 2: M (6K x 1/2)
• 3: H (6K)
When you select "1, 2 or 3", the machine does these
steps:
1) The jam alarm counter increases by "1" when a
paper jam is detected (except for jams in the ADF).
2) The jam alarm counter decreases by "1" when the set
number of sheets was copied or printed after the
machine detected the previous paper jam.
3) A jam alarm occurs when the jam alarm counter gets
to "10".
Specifies the error alarm level.
[0 ∼ 255 / 40 / 1 /step]
The unit is a hundred sheets. The default "40" means
4,000 sheets.
5-32
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
SM