Ricoh B156 Service Manual page 665

System Switch 16
No FUNCTION
0 Parallel Broadcasting
0: Disabled
1: Enabled
1 Priority setting for the G3 line.
0: PSTN-1 > PSTN-2 or 3
1: PSTN-2 or 3 > PSTN-1
2-7 Not used
System Switch 17 - Not used (do not change these settings)
System Switch 18 - Not used (do not change these settings)
System Switch 19
No FUNCTION
0-5 Not used
6 Extended scanner page
memory after memory option
is installed
0: Disabled
1: Enabled
7 Special Original mode
0: Disabled
1: Enabled
System Switch 1A - Not used (do not change these settings)
System Switch 1B - Not used (do not change these settings)
System Switch 1C - Not used (do not change these settings)
System Switch 1D
No FUNCTION
0 RTI/CSI/CPS display
0: Disabled
1: Enabled
1 Not used
2 Destination telephone number
display limitation
0: OFF, 1: ON
3-7 Not used
SM
CÓPIA NÃO CONTROLADA
1: The machine sends messages simultaneously
using all available ports during broadcasting.
This function allows the user to select the default G3
line type. The optional SG3 unit(s) are required to
use the PSTN-2 or 3 setting.
Do not change these settings.
Do not change the settings.
0: After installing the memory expansion option, the
scanner page memory is extended to 4 MB from 2
MB.
1: If this bit is set to 1 after installing the memory
expansion option, the scanner page memory is
extended to 12 MB. But the SAF memory decreases
to 18 MB.
1: If the customer frequently wishes to transmit a form
or letterhead which has a colored or printed
background, change this bit to "1". "Original 1" and
"Original 2" can be selected in addition to the "Text",
"Text/Photo" and "Photo" modes.
1: RTI/CSI/CPS is displayed on the top line of the
LCD panel during communication.
Do not change this setting.
When "1" is selected, the destination telephone
number display is limited and redial is disabled.
Do not change these settings.
51
CÓPIA NÃO CONTROLADA
BIT SWITCHES
SP No. 1-101-023
COMMENTS
SP No. 1-101-026
COMMENTS
SP No. 1-101-030
COMMENTS
B750