Ricoh B156 Service Manual page 639

Code Meaning
14-00 SMTP Send Error
14-01 SMTP Connection Failed
14-02 No Service by SMTP
Service (421)
14-03 Access to SMTP Server
Denied (450)
14-04 Access to SMTP Server
Denied (550)
14-05 SMTP Server HDD Full
(452)
14-06 User Not Found on SMTP
Server (551)
14-07 Data Send to SMTP Server
Failed (4XX)
14-08 Data Send to SMTP Server
Failed (5XX)
14-09
Authorization Failed for
Sending to SMTP Server
14-10 Addresses Exceeded
14-11 Buffer Full
14-12 Data Size Too Large
14-13 Send Cancelled
SM
CÓPIA NÃO CONTROLADA
Suggested Cause/Action
Error occurred during sending to the SMTP server.
Occurs for any error other than 14-01 to 16. For
example, the mail address of the system
administrator is not registered.
Failed to connect to the SMTP server (timeout)
because the server could not be found.
• The IP address for the SMTP server is not stored
in the machine.
• The DNS IP address is not registered.
• Network not operating correctly.
• Defective PC that does file transfer
SMTP server operating incorrectly.
Failed to access the SMTP server because the
access is denied.
• SMTP server operating incorrectly
• Defective PC that does file transfer
SMTP server operating incorrectly
Failed to access the SMTP server because the HDD
is full.
• SMTP Server hard disk full.
• Insufficient HDD space in the PC that does file
transfer
The user does not exist locally.
Failed to access the SMTP server because the
transmission fails.
• SMTP server operating incorrectly
• Defective PC that does file transfer
Failed to access the SMTP server because the
transmission fails.
• SMTP server operating incorrectly
• Defective PC that does file transfer
• POP-Before-SMTP or SMTP authorization failed.
• Incorrect setting for file transfer
Number of broadcast addresses exceeded the limit
for the SMTP server.
The send buffer is full so the transmission could not
be completed. Buffer is full due to using Scan-to-
Email while the buffer is being used send mail at the
same time.
Transmission was cancelled because the detected
size of the file was too large.
Processing is interrupted because the user pressed
Stop.
25
CÓPIA NÃO CONTROLADA
ERROR CODES
B750