Ardf Input Check (Sp6-007) - Ricoh B156 Service Manual

ARDF Input Check (SP6-007)

1. Enter the SP mode and select SP6-007.
2. Enter the number (1 – 11) for the item that you want to check. A small box will
be displayed on the SP mode screen with a series of 0's and 1's, as shown
below. However, only bit 0 at the right side of the screen is valid.
0 0 0 0 0 0 0 0
Bit 7 6 5 4 3 2 1 0
3. Check the status of bit 0 for the required item listed in the table below.
No. Description
1 Original set sensor
2 Original width sensor 1 (W1)
3 Original width sensor 2 (W2)
4 Original length sensor 1 (L1)
5 Original length sensor 2 (L2)
6 Original trailing edge sensor
7 ADF cover sensor
8 DF position sensor
9 Registration sensor
10 Exit sensor
11 Inverter sensor (Original reverse)
SM
CÓPIA NÃO CONTROLADA
Paper not detected
Paper not detected
Paper not detected
Paper not detected
Paper not detected
Paper not detected
Cover closed
ADF closed
Paper not detected
Paper not detected
Paper not detected
5-105
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
B156S505.WMF
Reading
0
Paper detected
Paper detected
Paper detected
Paper detected
Paper detected
Paper detected
Cover opened
ADF opened
Paper detected
Paper detected
Paper detected
1
B156/B220