Adjusting For Image Skew - Ricoh B156 Service Manual

LASER UNIT
14. LD cover [A] ( x 2)
15. Laser unit [B] ( x 4, Flat cable x 1)
NOTE: When reassembling,
connect the flat cable with
the blue side down.

Adjusting for Image Skew

1. Positioning pin [A] ( x 1)
2. Loosen  (x 4) [B].
3. Adjust the position of the laser unit
4. Fasten  (x 4) [B].
NOTE: After changing the position of
the laser unit, do not reinstall
the positioning pin. Keep the
pin in a safe place.
NOTE: When the image skews as
shown on the right, move the unit
1 mm in the direction of the black
arrow as shown in the diagram
above and to the right.
B156/B220
CÓPIA NÃO CONTROLADA
3-16
CÓPIA NÃO CONTROLADA
[A]
[B]
[A]
[B]
Paper feed
(A3 SEF)
B156R237.WMF
[ NOTE]
B156R238.WMF
B156R239.WMF
SM