Ricoh B156 Service Manual page 670

BIT SWITCHES
I-fax Switch 02
No FUNCTION
2-3 Text String for Return Receipt
This setting determines the text string output for the Return Receipt that confirms the
transmission was received normally at the destination.
00: "Dispatched"
Sends from PC mail a request for a Return Receipt. Receives the Return Receipt with
"dispatched" in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; dispatched
The "dispatched" string is included in the Subject string.
01: "Displayed"
Sends from PC mail a request for a Return Receipt. Receives the Return Receipt with
"displayed" in the 2nd part:
Disposition: Automatic-action/MDN-send automatically; displayed
The "displayed" string is included in the Subject string.
10: Reserved
11: Reserved
A mail requesting a Return Receipt sent from an IFAX with this switch set to
NOTE:
"00" (for "dispatched") received by Microsoft Outlook 2000 may cause an error.
If any setting other than "displayed" (01) causes a problem, change the setting
to "01" to enable normal sending of the Return Receipt.
4 Media accept feature
This setting adds or does not add the media accept feature to the answer mail to
confirm a reception.
0: Does not add the media accept feature to the answer mail
1: Adds the media accept feature to the answer mail.
NOTE: Use this bit switch if a problem occurs when the machine receives an answer
mail, which contains the media accept feature field.
5-6 Not Used
7 Image Resolution of RX Text Mail
This setting determines the image resolution of the received mail.
0: 200 x 200
1: 400 x 400
NOTE: The "1" setting requires installation of the Function Upgrade Card in order to
have enough SAF (Store and Forward) memory to receive images at 400 x
400 resolution.
B750
CÓPIA NÃO CONTROLADA
56
CÓPIA NÃO CONTROLADA
SP No. 1-102-003
COMMENTS
SM