Ricoh B156 Service Manual page 72

1000-SHEET FINISHER (B408)
[B]
2. Unpack the adjustment table (B488).
3. Set the finisher [A] on the adjustment table [B] and secure the finisher
( x 1).
4. Install the grounding plate [C] which is in the accessory box for the adjustment
table ( x 2).
5. Install the front joint bracket [D] ( x 2 - M4 x 14) and rear joint bracket [E] ( x
2 M4 x 14).
6. Open the front door [F], then pull the locking lever [G].
7. Align the finisher on the joint brackets, and lock it in place by pushing the
locking lever.
8. Secure the locking lever (1 knob screw - M3 x 8) and close the front door.
9. Install the copy tray [I] (1 knob screw - M4 x 10).
10. Connect the finisher cable [H] to the main machine.
B156/B220
CÓPIA NÃO CONTROLADA
[A]
[C]
B408I152.WMF
[I]
CÓPIA NÃO CONTROLADA
[E]
[D]
[H]
[F]
1-44
[G]
B408I114.WMF
SM