Ricoh B156 Service Manual page 236

SERVICE PROGRAM MODE
Mode No.
1
(Class 1, 2, and 3)
905 Fusing Roller
0: New 1: Old
920 Exit Full Timer
Exit Full Timer
930 Fusing Oil Add
Fusing oil add
940 LEF Priority–Bypass
LEF Priority–Bypass
B156/B220
CÓPIA NÃO CONTROLADA
Selects the pressure roller type.
[0 ~ 1 / 0 / 1 /step] DFU
• 0: New pressure roller
• 1: Old pressure roller
NOTE: If you change this SP, it changes the fusing
temperature values (SP1-105-2 to 13 and
SP1-105-15 to 16)
[10 ~ 60 / 10 / 1 s/step] DFU
Forces the oil pump to supply silicone oil up from the oil
tank to the tank in the oil supply unit. If the oil end
sensor detects oil in the oil supply unit, this SP will not
start the pump.
Selects the default paper feed direction of the by-pass
tray.
[0 ~ 1 / 0 / 1 /step]
• 0: SEF
• 1: LEF
The machine detects only the width, but detects the size
based on this information.
If the setting is 0 (SEF): When A4 LEF is placed in the
bypass tray, the machine detects this as A3. A4 SEF will
be detected as A4.
If the setting is 1 (LEF): The machine will detect A4LEF
as A4. However, if A4 SEF is placed in the bypass tray,
it will be detected as A5.
5-8
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
SM