Ricoh B156 Service Manual page 249

Mode No.
4
(Class 1, 2, and 3)
020 DF Glass Dust Check
1 Dust Check
2 Detect Level
3 Image Correct Level
301 APS Data Confirmation
APS Data
Confirmation
303 APS Minimum Size Setting
305 ADF Size Change
400 Scanning Blank Margin
1 Book: Lead Edge L
2 Book: Trail Edge R
3 Book: Left
4 Book: Right
5 ADF: Lead Edge
7 ADF: Left
8 ADF: Right
SM
CÓPIA NÃO CONTROLADA
Turns DF glass dust detection on/off.
[0 ~ 1 / 0 / 1 /step]
• 0: OFF
• 1: ON
Selects the detection level.
[0 ~ 8 / 4 / 1 /step]
0: Least detailed detection, 8: Most detailed detection
Selects the vertical line correction when using the DF.
[0 ~ 4 / 0 / 1 /step]
0: Disables image correction level
4: Most effective correction
Displays the status of the APS sensors and platen/DF
cover sensor.
Selects whether the copier determines that the original is
A5 sideways or lengthwise size when the APS sensor
cannot detect the size.
[0 ∼ 2 / 0 / 1 /step]
If "2: A5 lengthwise" is selected, paper sizes that cannot
be detected by the APS sensors are regarded as A5
lengthwise.
If "1: A5 sideways" is selected, paper sizes that cannot be
detected by the APS sensors are regarded as A5
sideways.
If "0: Not detected" is selected, "Cannot detect original
size" will be displayed.
Selects the original size type for the default original size
detection.
[0 ~ 2 / 0 / 1 /step]
0: Standard
1: A4/LT
2: 8K/16K
Specifies the scanning blank margin for each edge in
platen mode.
[ 0 ~ 3.0 / 0 / 0.1 mm/step]
Specifies the scanning blank margin for each edge in ADF
mode.
[ 0 ~ 3.0 / 0 / 0.1 mm/step]
5-21
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Function / [ Setting ]
B156/B220