8-62 CHASSIS
REMOVAL AND DISASSEMBLY
• Remove the rear wheel. (8-33)
• Remove the rear brake panel 1.
• Remove the brake shoes 2.
• Remove the rear brake cam lever 3 by removing bolt.
• Remove the washer 4, spring 5 and O-ring 6.
• Remove the rear brake cam 7.
INSPECTION
BRAKE DRUM
Inspect the brake drum and measure the brake drum I.D. to
determine the extent of wear. Replace the brake drum if the
measurement exceeds the service limit. The value of this limit is
indicated inside the brake drum.
09900-20102: Vernier calipers
Brake drum I.D.
Service Limit: 180.7 mm