Iat Sensor Inspection; Iat Sensor Removal/Installation; Ect Sensor Inspection; Ect Sensor Removal/Installation - Suzuki VZ800 Service Manual

IAT SENSOR INSPECTION

The intake air temperature sensor is installed at the back side of
the air cleaner box. (5-47)

IAT SENSOR REMOVAL/INSTALLATION

• Remove the air cleaner box. (5-47)
• Disconnect the IAT sensor coupler 1 and remove the IAT
sensor 2.
• Installation is in the reverse order of removal.

ECT SENSOR INSPECTION

The engine coolant temperature sensor is installed at the No. 2
cylinder head cover. (5-42)

ECT SENSOR REMOVAL/INSTALLATION

• Remove the fuel tank. (6-3)
• Disconnect the ECT sensor coupler 1 and remove the ECT
sensor 2.
• Installation is in the reverse order of removal.
 ECT sensor: 18 N·m (1.8 kgf-m, 13.0 lb-ft)

TO SENSOR INSPECTION

The tip-over sensor is located under the front seat. (5-52)

TO SENSOR REMOVAL/INSTALLATION

• Remove the right frame cover. (8-4)
• Disconnect the coupler 1 and remove the TO sensor 2.
• Installation is in the reverse order of removal.
NOTE:
When installing the TO sensor, bring the "UPPER" letter A on it
to the top.
FI SYSTEM 5-77