Suzuki VZ800 Service Manual page 300

8-20 CHASSIS
• Install the front fork to the steering stem, turn signal clamps
(10-22 and -23) and steering stem upper bracket.
• Align the upper surface of the outer tube with the upper sur-
face of the steering stem upper bracket.
• After loosening the front fork upper clamp bolts 4 slightly,
tighten the front fork cap bolt 3 to the specified torque.
 Front fork cap bolt 3: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Tighten the front fork upper clamp bolts 4 to the specified
torque.
 Front fork upper clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Tighten the turn signal light clamp bolts 5.
• Tighten the front lower clamp bolts 6 to the specified torque.
 Front fork lower clamp bolt: 33 N·m (3.3 kgf-m, 24.0 lb-ft)
• Remount the front wheel. (8-10 to -11)