2-10 PERIODIC MAINTENANCE
Both right and left valve clearances should be as
closely set as possible.
• Rotate the generator rotor 450 degrees (1 and 1/4 turns) and
align the "F I T" line on the rotor with the center of hole on the
generator cover.
Inspect the No. 2 engine's valve clearance as the same manner
above.
NOTE:
Use the thickness gauge from the arrow marks as shown in the
illustration.
FUEL HOSE
Inspect every 6 000 km (4 000 miles, 12 months).
Inspect the fuel feed hose for damage and fuel leakage. If any
defects are found, the fuel hoses must be replaced.
F T
FRONT
No. 2 Engine
No. 1 Engine