Final Gear Shims Adjustment - Suzuki VZ800 Service Manual

FINAL GEAR SHIMS ADJUSTMENT

FINAL GEAR BEARING CASE SHIM CLEARANCE
• Install the final driven gear, shims (1 and 2) and final gear
bearing case to the final gear case.
• Tighten the final gear case bolts to the specified torque.
 Final gear case bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
NOTE:
It is not necessary to apply SUZUKI BOND "1207B" to the
matching surface at this stage.
• Measure the clearance between the shims and bearing. If it is
not within the specification, the shims must be changed.
Standard
 Final gear case shim clearance
Standard: 1.00 mm (0.039 in)
Shims 2 specifications
Part No.
27327-34200
27327-34210
27327-34220
27327-34230
NOTE:
The shims 2 are available as a set (27327-34810).
Shim thickness
0.35 mm (0.014 in)
0.40 mm (0.016 in)
0.50 mm (0.020 in)
0.60 mm (0.024 in)
SHAFT DRIVE 4-17