• Install the O-rings and dust seals to each fuel injector.
• Apply thin coat of the engine oil to the new O-rings and dust
seal.
Replace the O-rings and dust seals with the new ones.
• Install the fuel injector 3 by pushing it straight to the delivery
pipe 4.
NOTE:
Align the boss E of the injector with the groove F of the delivery
pipe.
Never turn the injector while pushing it.
• Install the fuel delivery pipes 5 to the throttle body assembly.
Never turn the fuel injectors while installing them.
• Tighten the fuel delivery pipe mounting screws to the speci-
fied torque.
Fuel delivery pipe mounting screw:
• Apply thin coat of the engine oil to the new O-rings.
Replace the O-rings with the new ones.
3.5 N·m (0.35 kgf-m, 2.45 lb-ft)
FUEL SYSTEM AND THROTTLE BODY 6-19