Suzuki VZ800 Service Manual page 109

BEARING DISASSEMBLY
• Remove the bearing retainers.
• Remove the bearing with the special tools.
 09913-70210: Bearing installer set
09921-20240: Bearing remover set
NOTE:
If abnormal noise does not occur, it is not necessary to remove
the bearing.
BEARING REASSEMBLY
• Install the bearing into the crankcase with the special tool.
NOTE:
* The stamped mark side of the bearing faces (1, 2, 4) out-
side.
* The stamped mark side of the bearing faces (3, 5, 6) inside.
 09913-70210: Bearing installer set
• Apply a small quantity of the THREAD LOCK "1342" to the
bearing retainer screws. (USA)
• Apply a small quantity of the THREAD LOCK SUPER "1322"
to the bearing retainer screws. (Others)
 99000-32050: THREAD LOCK "1342" (USA)
 99000-32110: THREAD LOCK SUPER "1322" (Others)
OIL PRESSURE SWITCH
• Remove the oil pressure switch.
ENGINE 3-63
(USA)
(USA)
(Others)
(Others)
(USA)
(Others)