Suzuki VZ800 Service Manual page 155

• Install the correct shims 2 to the final drive bevel gear and
install the bevel gear to the final gear case.
Shim adjustment (4-18)
• Apply grease to the O-ring and the oil seal.
• Install the bearing stopper 3.
 99000-25030: SUZUKI SUPER GREASE "A" (USA)
99000-25010: SUZUKI SUPER GREASE "A" (Others)
• Tighten the bearing stopper to the specified torque with the
special tool.
 09924-62410: Final drive gear bearing holder wrench
 Final drive bevel gear bearing stopper:
• Install the final drive coupling 4 and washer 5.
• Apply a small quantity of the THREAD LOCK to the final drive
bevel gear coupling nut.
 99000-32030: THREAD LOCK "1303"
• Tighten the nut to the specified torque with the special tool.
 Final drive bevel gear coupling nut:
 09924-62430: 22 mm Long socket
09924-64510: Final drive gear coupling holder
• Lock the final drive bevel gear coupling nut with a center
punch.
110 N·m (11.0 kgf-m, 79.5 lb-ft)
100 N·m (10.0 kgf-m, 72.5 lb-ft)
SHAFT DRIVE 4-23