MUTOH Falcon II Outdoor Maintenance Manual page 37

Step 4 :
Remove the top of the side cover R.
Step 5 :
Remove the 4 bolts from the front and back of the inner surface on the bottom of side cover R and the front
cover nut.
1 = Hexagon socket head cap screws (M4x16)
Step 6 :
Remove the 6 bolts from the front and back of the bottom surface on the bottom of the side cover R.
Step 7 :
Remove the bottom of side cover R.
1 = Hexagon socket head cap screws (M5x18)
Step 8 :
Replace the parts inside the printer.
Step 9 :
Reinstall all parts in the opposite order of the removal procedure.
Falcon II Outdoor series printers – Maintenance Manual
2 = Cover nut
37 AP-74065, Rev. 1.0, 21/11/03