MUTOH Falcon II Outdoor Maintenance Manual page 134

Step 6 :
Remove the 3 screws fixing the P/S board installation board.
Step 7 :
Remove the P/S board installation board.
Step 8 :
Remove the coupling screws and O-ring from the I/H assembly.
Step 9 :
Remove the 4 screws fixing I/C slide 2 and the I/H assembly.
1 = I/H assembly
3 = Screws (M3x8) fixing I/C slide 2 and the I/H
assembly
Step 10 :
Remove the I/H assembly.
Step 11 :
Reinstall all parts in the opposite order of the removal procedure.
Notes :
Please soak the O-ring in cleaning liquid before installation.
Falcon II Outdoor series printers – Maintenance Manual
2 = I/C slide 2
134 AP-74065, Rev. 1.0, 21/11/03