MUTOH Falcon II Outdoor Maintenance Manual page 311

4 Cleaning does not fix problems
such as clogging or split nozzle.
Falcon II Outdoor series printers – Maintenance Manual
(2) Repeat head • If the condition is
cleaning several not restored by
times. performing the
cleaning operation,
leave the product for
several hours then
recheck it.
(1) Check the use • Under low
conditions of the humidity conditions
product. in particular, printing
is performed poorly.
Check the
conditions under the
guaranteed
operation
conditions.
(2) Check if the • Printing
conditions occur performance is not
after ink stable immediately
replenishment. after ink
replenishment.
Leave the product
for several hours
then recheck it.
(3) Check the • Using the provided
cleaning wipers for cleaning cloth for
contamination. cleaning the wipers,
slightly dampen with
cleaning liquid it and
wipe the surface of
the cleaning wipers,
then recheck their
condition by
performing the
cleaning operation.
• If the ink is solid
and does not come
off by wiping,
replace the wiper.
(4) Check the • Check the
installation installation
conditions of the conditions of the
cleaning wipers. wipers and fix them
securely.
(5) Check if the QR • Input the correct
codes are input QR codes.
correctly.
(6) The damper may • Replace the
be damaged. damaged damper.
(7) The print head • Replace the
assembly may be damaged print head
damaged. assembly.
311
→ User's Guide
→ Specifications
-
User's Guide
→ Replacing the
cleaner
→ Replacing the
cleaner.
→ Head rank input
menu.
→ Replacing the H
ink tube, tube
branch and damper
assembly.
→ Replacing the
print head assembly
and head tape
power cable.
AP-74065, Rev. 1.0, 21/11/03