MUTOH Falcon II Outdoor Maintenance Manual page 293

3 E069 error
Paper feed
timeout
4 E071 error PF
overcurrent
5 E 066 Error
CR Motor
6 E 068 Error
CR Encoder
Timeout occurred (3) Check
on paper travel (X- "Encoder:PF"
axis) during under
operation. "Test:Encoder" of
Displayed when the self-diagnosis
pressure roller has function.
not reached the
commanded
position.
An overload (4) PF motor
occurred in the PF assembly may be
motor (X-axis) damaged.
during operation. (5) Mainboard
assembly may be
damaged.
Trouble occurred in (1) Check the
the CF motor (Y- trouble history via
axis) during "Test:Record" of
operation. the self-diagnostic
Displayed when the function
motor commanded
value and feedback
from the encoder
are significantly
different.
Trouble occurred in (2) With the power
the head travel (Y- supply off, move
axis) during the carriage side to
operation. side to check for
Displayed when jamming.
there is no feedback
from the encoder. → Refer to Error
E072
Falcon II Outdoor series printers – Maintenance Manual
• Replace PF
motor assembly
• Replace
Mainboard
assembly
-
• Clean and
lubricate the rollers
of the CR rail.
293
→ Encoder Menu
→ Replacing PF
Motor Assembly
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
→ History Menu
→ Lubrication /
Bonding
AP-74065, Rev. 1.0, 21/11/03