MUTOH Falcon II Outdoor Maintenance Manual page 313

7 Drawn black on a full screen (Or
other specified colour)
Falcon II Outdoor series printers – Maintenance Manual
(8) The CR board • Replace the CR
assembly may have board assembly.
a problem.
(9) The HEAD_DRV • Replace the
board may be HEAD_DRV board.
damaged.
(10) The Mainboard • Replace the
assembly may have Mainboard
a problem. assembly.
(1) Check the head • Redo the
and CR cables for connections of the
skewed insertion. following
connectors.
Connectors for the
print head.
• CR board : J201 –
J232
• Mainboard : J137 -
J152
(2) The head and • Replace the CR
CR cables may be tape power cables.
damaged.
(3) The print head • Replace the print
assembly may be head assembly.
damaged.
(4) The CR board • Replace the CR
assembly may have board assembly.
a problem.
(5) The HEAD_DRV • Replace the
assembly board HEAD_DRV
may be damaged. assembly board
313
→ Replacing the CR
board assembly
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly.
→ Replacing the
print head assembly
and head tape
power cable.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly
→ Replacing the
steel bearer, tube
bearing, CR tape
power cable and ink
tube.
→ Replacing the
print head assembly
and head tape
power cable.
→ Replacing the CR
board assembly.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly
AP-74065, Rev. 1.0, 21/11/03