MUTOH Falcon II Outdoor Maintenance Manual page 258

Step 2 :
Following the instructions in "Self-Diagnosis Functions" to start the equipment up in the self-diagnosis mode and
release the head lock.
Step 3 :
Disconnect the tubes to the heads.
Step 4 :
Remove the waste tubes from there connector.
1 = connection to the heads
Step 5 :
Remove the pump assemblies.
Step 6 :
Reinstall the new pump assemblies.
Step 7 :
Reconnect the tubes.
87" Falcon II Outdoor 2 heater
Falcon II Outdoor series printers – Maintenance Manual
2 = waste tube connection
87" Falcon II Outdoor 4 heater
258 AP-74065, Rev. 1.0, 21/11/03