MUTOH Falcon II Outdoor Maintenance Manual page 316

12 The printing boundary is
smeared.
Falcon II Outdoor series printers – Maintenance Manual
(14) The head • Replace the
assembly may be damaged head
damaged. assembly.
(15) The ink tube • Replace the ink
may be damaged. tube.
(16) The CR board • Replace the CR
assembly may have board assembly.
a problem.
(17) The Mainboard • Replace the
assembly may have Mainboard
a problem. assembly
(1) Check if the • If the condition is
condition is not recovered by
recovered by performing the
cleaning. cleaning operation a
couple of times,
leave the product for
a while then recheck
it.
(2) Check if the set • Reset the
paper is one of recommended
those recommended paper and recheck
by MUTOH. the condition. If
paper not
recommended by
MUTOH is used, the
paper may not be
recognized correctly
by the paper sensor.
• Check the
condition using the
printing mode that is
recommended for
the paper.
(3) Check the head • Adjust the head.
adjustments.
(4) Check if the QR • Input the correct
code is input QR codes.
correctly.
(5) The CR cables • Replace the CR
may be damaged. tape power cables.
316
→ Replacing the
print head assembly
and head tape
power cable.
→ Replacing the
steel bearer, tube
guide, CR tape
power cable and ink
tube.
→ Replacing the
print head assembly
and head tape
power cable.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly
→ User's Guide
→ User's Guide
→ Head precision
adjustment
→ Head rank input
menu
→ Replacing the
steel bearer, tube
guide, CR tape
power cable and ink
tube.
AP-74065, Rev. 1.0, 21/11/03