Replacing The Pump Area; Replacing The Pump Assembly - MUTOH Falcon II Outdoor Maintenance Manual

4.9. REPLACING THE PUMP AREA

4.9.1. Replacing the pump assembly

Notes :
Step 1 :
Remove the connector and tube from the pump assembly.
1 = tube connections
Notes :
Remove following covers before replacing the parts in the PF motor assembly.
Side cover R: refer to "Removing side cover R"
Side cover L: refer to "Removing side cover L"
Front cover: refer to "Removing the front cover"
Carriage cover: refer to "Removing the carriage cover"
Y rail cover: refer to "Removing the Y rail cover"
Maintenance cover: refer to "Removing the maintenance cover"
There is some remaining ink in the tubes. Be careful that the ink is not spilled from
the tube onto the printer or items close to the printer.
129
Falcon II Outdoor series printers – Maintenance Manual
AP-74065, Rev. 1.0, 21/11/03