Step 5 :
Remove the pump assemblies.
Step 6 :
Reinstall the new pump assemblies.
Step 7 :
Reconnect the tubes.
50" or 64" Falcon II Outdoor 2 heater
(2) For 87 inch spec
Notes :
1 = Pump 1
3 = Pump 3
Step 1 :
Remove the maintenance cover.
When the pump assembly has been installed to the main body, the pumps are
"pump 1", "pump 2", "pump 3" and "pump 4" in sequence from left to right, viewed
from the front.
Falcon II Outdoor series printers – Maintenance Manual
50" or 64" Falcon II Outdoor 4 heater
2 = Pump 2
4 = Pump 4
257
AP-74065, Rev. 1.0, 21/11/03