MUTOH Falcon II Outdoor Maintenance Manual page 331

5 Other functions are not
performing correctly.
6 The printing position has been
misaligned.
7 A portion of the data has not
been drawn (is missing).
8 Garbled characters or printings
are produced.
Falcon II Outdoor series printers – Maintenance Manual
a problem. assembly
(1) Check if CW • Make adjustments.
adjustments are
made correctly.
(2) Check the top & • Make adjustments.
bottom adjustments
(3) The program • Upgrade the
ROM may have firmware version
failed.
(4) The Mainboard • Replace the
assembly may have Mainboard
a problem. assembly
(1) The program • Upgrade the
ROM may have firmware version.
failed.
(2) Check the T • If contaminated
fence for with grease and
contamination and dusts, wipe with a
bends. dry cloth.
• If contaminated
with ink, wipe with a
lightly dampened
cloth and then with
a dry cloth.
•If contamination is
severe, replace the
T fence.
331
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly
→ CW adjustment
menu
→ Top & Bottom
adjustment menu
→ Firmware
installation
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_ DRV board
assembly and
cooling fan
assembly
→ Firmware
installation
→ Replacing the T
fence
AP-74065, Rev. 1.0, 21/11/03