MUTOH Falcon II Outdoor Maintenance Manual page 272

Head base Head installation board
components
Maintenance Maintenance assembly
components
Pump Combined gear
Components
Deceleration gear
Idler gear
Idler gear axis
Winding Winding assembly (gear
components components)
Parts
PF Driving Set screw
Components
CR Driving Adjusting screw of the CR
Components slave pulley
Cursor Step-bore screw
Components
Maintenance E ring
components
Scroller Set screw
receptacle R
components
Others Screw
PF Driving CR tape power cable
Components
Head base Head 2 tape wire
components
Falcon II Outdoor series printers – Maintenance Manual
Apply to the screw Kanto Kasei Co.,
hole position which Ltd.
fastens the shoulder
screw
Apply to the gear Kanto Kasei Co.,
and cam Ltd.
components
Apply to the gear Kanto Kasei Co.,
components Ltd.
Apply to the gear Kanto Kasei Co.,
components Ltd.
Apply to the gear Kanto Kasei Co.,
components Ltd.
Apply between the Kanto Kasei Co.,
pump base and the Ltd.
idler gear axis.
Apply to the gear Kanto Kasei Co.,
components Ltd.
Item
Apply the screw lock Three Bond Co.,
to the coupling set Ltd.
screw.
After adjusting the Three Bond Co.,
steel belt, apply the Ltd.
screw lock.
Screw lock applying Three Bond Co.,
to the shoulder Ltd.
screw that fastens
the cursor and head
mounting plate
Apply to each of the Three Bond Co.,
E-rings (prevents Ltd.
noise due to
vibration).
Apply the screw lock Three Bond Co.,
to the adjusting Ltd.
knob set screw.
Apply to the position Three Bond Co.,
of the screw lock. Ltd.
Stick double-sided Not specified
tape to the CR tape
power cables
(locating).
Stick double-sided Not specified
tape to the head 2
tape power cables
(locating and
preventing
floatation).
272
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
FLOIL G-MK-1
Manufacturer
1401
1401
1401
1401
1401
1401
AP-74065, Rev. 1.0, 21/11/03
Type