MUTOH Falcon II Outdoor Maintenance Manual page 296

10 E 074 Error
Cover
11 E 075 Error
Head
OverCurrent
Trouble occurred in (1) Check the
the cover sensor. cover sensor via
"Test/Sensor" of
the self-diagnostic
function.
(2) The cover
sensor assembly
may be damaged.
(3) The Mainboard
assembly may
have a problem.
Trouble occurred (1) Make sure that
during printer the connections of
operation due to an the head tape
overload of the print power cables are
head. good.
(2) Make sure that
the connections of
the CR tape power
cables are good.
(3) The print head
may be damaged.
(4) The CR board
assembly may be
damaged.
Falcon II Outdoor series printers – Maintenance Manual
• Make sure that
the connection of
the cover sensor
assembly is good.
• Mainboard : J155
– J156
• Replace the
cover sensor
assembly.
• Replace the
Mainboard
assembly.
•Redo the
connections of the
following
connectors.
• CR board : J217
– J232
• Reset the head
error
•Redo the
connections of the
following
connectors.
• CR board : J201
– J216
• Reset the head
error
•Replace the print
head assembly
• Replace the CR
board assembly
• Reset the head
error
296
→ Sensor Menu
→ Replace the
cover R sensor
assembly and the
cover L sensor
assembly.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV
board assembly
and cooling fan
assembly.
→ Replacing the
CR board
assembly.
→ Counter
initialization menu
→ Replacing the
CR board
assembly
→ Counter
initialization menu
→ Replacing the
print head
assembly and
head tape power
cable.
→ Counter
initialization menu
→ Replacing the
CR board
assembly
→ Counter
initialization menu
AP-74065, Rev. 1.0, 21/11/03