Setting The Water Window - Toro TIS-240 User Manual

Within the Schedule menu, turn the Upper Line knob to view
1.
the following display:
SET IRR START HOUR SCH A
03:01am
2. The default Water Window start time is 3:01 a.m. Turn the
Lower Line knob to adjust the hour digit(s) and a.m./p.m.
3. Turn the Upper Line knob right one stop to view the following
display:
SET IRR START MIN SCH A
03:01am
4. Turn the Lower Line knob to adjust the minutes digits.
5. Turn the Upper Line knob right one stop to view the following
display:
SET WINDOW HOUR
23:00 hrs
6. Turn the Lower Line knob to adjust the Water Window duration
from 6 – 23 hours.
7. Turn the Upper Line knob right one stop to view the following
display:
SET WINDOW MIN
23:00 hrs
8.
Turn the Lower Line knob to adjust the minutes of duration
from 01 – 59. End time is automatically calculated.
STOP: This completes the User-defined Schedule setup procedure.
Continue on page 29 to complete User-defined station programming.
For Automatic Schedule setup, continue on page 17.
16
SCH A
(End 11:01pm)
SCH A
(End 11:01pm)