Restoring System Default Values - Toro TIS-240 User Manual

Restoring Station PROGRAM Function Default Values
!
Important:
Restoring the station Program default values erases all user-defined
values and settings for the selected station(s).
1. Turn the Function Selector knob to COPY to view the following
display:
COPY FROM STA 01
To STA 02
2. Turn the Upper Line knob right one stop past the highest station
number to view the following display:
COPY PROGRAM DEFAULTS
To STA 02
3. Turn the Lower Line knob to select the station number to be
restored.
4.
To select All Stations, turn the Lower Line knob one stop past the
highest station number, to view the following display:
COPY PROGRAM DEFAULTS
To ALL STA's (Press COPY)
Note: The number of active stations defined in the Setup function,
determines the number of stations that can be selected.
Press and hold the COPY button. Release the button when
5.
COPYING DONE! is displayed.
COPYING
(Press COPY)
(Press COPY)
DONE!
39