Water Window; Continuous Run - Toro Sentinel Programming Manual

Water Window

(7 Fields to set: Program number, "FROM" hour, minute, AM/PM, "TO" hour, minute, AM/PM)
The Water Window is the period of time in a 24-hour day that automatic watering can occur. Selecting a FROM and TO time defines the
Water Window start time and end time. A program that is running at the end of the Water Window is terminated immediately. Use Water
Windows to set up continuous run start and stops automatically.
1 2

Continuous Run

(2 Fields to set: Program number, Continuous Run OFF or ON)
Selecting Continuous Run will automatically repeat the program cycle continuously for the defined Water Window duration.
The controller is capable of running any one or combination of programs continuously. To manually start the desired program, use the same
procedure as in Auto Slot/Stn. Use the CLUSTER SELECT and the PROGRAM SELECT keys to select the desired cluster program. Use
the ON and OFF keys to turn continuous run on and off. Press ENTER to save. Use Water Windows below to set up continuous run start
and stops automatically.
1 2
3
ENTER
- OR -
3
ENTER
- OR -
4
ENTER - OR -
4
ENTER
- OR -
21