Setting The Maximum Backup Et Value; Setting The Zip Code - Toro TIS-240 User Manual

Setting the Maximum Backup ET Value

The Maximum Backup ET value is a failsafe measure used by the
controller to calculate daily watering requirments in the event that
current ET Everywhere data is not recieved for an extended period.
The Maximum Backup ET default value of 2.00 is automatically
calibrated to compensate for seasonal weather changes.
1. Within the Setup menu, turn the Upper Line knob to view the
following display:
MAX BACKUP ET Part 1
2.00
2.
The whole number of the Maximum Backup ET value is selected
by default. To adjust the value from 1 – 3, turn the Lower Line
knob.
Note: The Maximum Backup ET is adjustable from 0.50 – 3.99.
The whole number is only adjustable to 0 when the decimal
number value is .50 or higher.
Turn the Upper Line knob right one stop to select the decimal
3.
number.
4. Turn the Lower Line knob to adjust the decimal number value.

Setting the ZIP Code

1. Within the Setup menu, turn the Upper Line knob to view the
following display:
SET ZIP CODE Digit 1
12345
2. The underlined digit is selected. To select a different digit, turn
the Upper Line knob.
3. Turn the Lower Line knob to adjust the digit from 0 – 9.
4. Repeat steps 2 and 3 to set the five-digit ZIP Code number.
13