Setting The High Et Start Time; Setting The Watering Day Schedule - Toro TIS-240 User Manual

Setting the High ET Start Time

During periods of higher than normal ET rate, additional watering
may be needed to maintain the required soil moisture content,
as is typical for shallow-rooted turf during summer months. The start
time of this additional watering cycle is set by the High ET Start Time.
1.
Within the Schedule menu, turn the Upper Line knob
to view the following display:
SET HiET START HR
01:00pm
2. The High ET Start default time is 1:00 p.m. To adjust the hour,
turn the Lower Line knob.
Note: The High ET Start Time can only be set in p.m. hours.
3. Turn the Upper Line knob right one stop to view the following
display:
SET HiET START MIN
01:00pm
4. To adjust the minutes, turn the Lower Line knob to set 01 – 59
minutes.
Selecting a Watering Day Schedule
Active watering day schedule can be selected using one of the
following scheduling methods:
• Set By WeatherTRAK - Watering days selected per current
ET data supplied by the WeatherTRAK ET Everywhere service.
• Odd/Even - All odd- or all even-numbered days.
• Interval - Active days based on a recurrent interval ranging from
01 (every day) to 31 (every 31st day).
• Days-of-Week - Specified days of the week for each month.
Within the Schedule menu, turn the Upper Line to view the
1.
following display:
SELECT WATER DAYS
Set by WeatherTRAK(Dflt)
SCH A
SCH A
SCH A
17