Restoring SCHEDULE Function Default Values
!
Important:
Restoring the controller Schedule default values erases all
user-defined values and settings within this function.
1.
Turn the Function Selector knob to COPY to view the following
display:
COPY FROM STA 01
To STA 02
Note: The number of active stations defined in the Setup function,
determines the number of stations that can be selected.
2.
Turn the Upper Line knob right one stop past Program Defaults
to view the following display:
COPY SCHEDULE DEFAULTS
3.
Press and hold the COPY button. Release the button when
COPYING DONE! is displayed.
COPYING
40
(Press COPY)
(Press COPY)
DONE!