Using The Manual Watering Function; Manually Operate Specific Stations - Toro TIS-240 User Manual

Using the Manual Watering Function

Manual operation enables operation of all stations (in sequence) or
individual station(s) at any time. Manual operation lasts for a
specified number of minutes and starts immediately, whether or not
the current day is a scheduled watering day. Only one station can be
on at a time when operating manually.

Manually Operate Specific Stations

1. T urn the Function Selector knob to MANUAL to view the
following display:
MANUAL WATER
Specific Stations
Turn the Upper Line knob to select the station number as shown
2.
in the following display (example):
MANUAL WATER
00.0 Minutes
3. Turn the Lower Line knob to select manual operating time
from 1 – 99 minutes in one-minute increments.
MANUAL WATER
20.0 Minutes
The station cycle time will count down in 10th's of a minute. The
station will shut off when the cycle time counts down (or is adjusted
down) to 00.0 minutes.
4. Repeat steps 2 and 3 to select additional stations for manual
operation. Each station placed in queue will operate one at
a time in numerical sequence as the preceding station times out
and shuts off.
Note: To terminate operation, either reduce the station runtime
to 00.0 or turn the Function Selector knob momentarily to the
OFF position.
60
SET STA 01
SET STA 01
NOW ON