Using The Off Function; Using The Display Adust Function - Toro TIS-240 User Manual

Using the OFF Function

Once the Function Selector knob is turned to OFF and remains in
this position for at least one second, all active watering operation
will stop. Turning the Function Selector knob to any other position
removes the controller from the Off mode.
To turn off the controller, turn the Function Selector knob to OFF.
Dec 07 2006
Irrigation is Turned OFF
Note: For extended shutdown of the irrigation system, leave the
Function Selector knob in the OFF position. No automatic watering
can occur, but all other controller functions will be maintained.
Using Display Adjust Function
Use the DISPLAY ADJUST function to inrease or decrease the display
contrast for optimum viewing.
1. Turn the Function Selector knob to DISPLAY ADJUST to view
the following display:
ADJUST CONTRAST
Use Upper Knob to Change
2. Turn the Upper Line knob right to increase or left to decrease the
contrast as preferred.
48
09:17:37am
C=122