Setting The Number Of Watering Cycles - Toro TIS-240 User Manual

3. Turn the Upper Line knob right one stop to select the following
display:
SET CYCLE 10ths
12.0 Minutes
The station Cycle time 10ths is set to 0 by default. To adjust the
4.
cycle time 10ths digit from .0 – .9, turn the Lower Line knob
as shown in the example below.
SET CYCLE 10ths
12.5 Minutes
Selecting the Number of Watering Cycles
1. Within the Program menu, turn the Upper Line knob to view
the following display:
SET # OF CYCLES
01 Cycles/Operating Day
The number of watering cycles per active day is set to 1 by default.
2.
To adjust the number from 0 – 20 cycles per day, turn the Lower
Line knob.
Note: Adjusting the number of cycles per day to 00 will disable
the station from automatic operation.
STA 01
STA 01
STA 1
31