Setting An Odd/Even Day Schedule - Toro TIS-240 User Manual

2.
The Set by WeatherTRAK option is selected by default. To use
this scheduling method, contunue at step 3 below. To select an
alternate scheduling method, turn the Lower Line knob to display
the desired option, then continue as noted:
• Odd/Even Days – below
• Interval – page 19
• Days-of-Week – page 19
3.
Turn the Upper Line knob right one stop to view the following
display:
NON-WATER DAY
None
4. The defalt setting for a Non-Watering Day is None. To prevent
watering on a specific day of the week, turn the Lower Line knob
to display the day abbreviation.
Note: This completes the setup procedure for an watering Automatic
schedule. To set up another watering schedule, repeat the setup procedure
starting on page 15.

Setting an Odd/Even Day Schedule

This watering day schedule option enables all odd-or all even-numbered days
to be set as active watering days.
Note: When an Odd day schedule is used, two consecutive watering days
will occur at the end of all months with 31 days.
1.
Within the Select Water Days menu, turn the Upper Line knob to view
the following display:
WATER DAY ODD/EVEN
Odd
2. An Odd numbered watering day schedule is selected by default.
To select Even, turn the Lower Line knob.
18
SCH A
SCH A